The Unibagger Packaging System from Impulse Dynamics combines a Model 400 Bag Loader with a Model 600 Gravity Slide Sealer on a sturdy unitized frame. The bag loader is mounted on a slide rack for easy repositioning for different bag lengths. The sealer adjusts easily for different product lengths, widths or thicknesses, and for the angle of the slide table.

The Gravity Slide Sealers come as either thermal impulse sealers (for extra strong sealing) or as constant heat sealers for higher speed sealing. Capable of speeds of up to 30 bags per minute.

Each drop sealer comes standard with a trim wire and scrap blow off. As the operator loads the product through the entering guide arms it slide easily into the bag which has been opened by the bag loader blower. Continuing the forward motion, the operator strip the bagged product off the wicketed bag stack and drops it into the gravity slide sealer section of the machine. Holding pins stop the package's downward travel. A trip microswitch or an electric eye sensor (optional) signals the sealer jaw to close.

The seal & trim wires are energized, effectively sealing the bag opening and trimming the excess bag scrap. A kicker plate severs the excess material above the seal, which is blown away by a short blast of compressed air.

As the sealer jaw opens, the holding pins retract. The finished package slides down off the slide rack. The holding pins return, ready for the next package. An optional incline takeaway conveyor can send your package down the assembly line for further production or loading.

All product contact parts are stainless steel making it suitable for a wide variety of applications.