Foot Pedal Activated Impulse Heat Sealers
A Return to Basics

Oct 18, 2000
These new machines are a return to basic 'bullet-proof' heavy-duty design as specified by MIL-S-22783C & A-A-2953. Even though these military specifications are no longer actively enforced, the guidelines they established for robust construction and ease of operation still serve as viable performance goals.

This new family of machines are foot pedal activated and portable. The controls are simple yet suitable for a validated process. The heat impulse and cooling dwell cycles are controlled by solid-state timers in specific time intervals. A dwell indicator light illuminates the end of the sealing cycle signaling the operator to open the sealing jaws.

Model 14-Type III, Class I

RFQ's and RFP's are invited via email, telephone, and fax.
Please see our website, www.impulsedynamics.com for
additional contact information. We look forward to your
feedback and to the opportunity to be of service.
Impulse Dynamics is very pleased to introduce our new line of thermal impulse heat-sealing machinery. They are designed and built in accordance with our Vertrod experience and are in the
Vertrod-Tradition of heavy-duty, industrial grade, heat-sealing
machinery. The pictures below illustrate our new
iSeal model 14 & 20 inch sealers.

Design Features:

  • 14 or 20 Inch Long Ribbon Seal
  • Either 1/8 or 1/4 Inch Wide Seal
  • 3/8 Inch Wide Ribbon Seal (Optional)
  • Trim Seal with Scrap Blow-off (Optional)
  • Adjustable Heat and Cool Digital Timers (Standard)
  • Second Water-Cooled Heater Bar (Optional)
  • Low-pressure Safety Jaw Close (Standard)
  • Water-Cooled Heater Bar (Standard)
  • Floor Standing Frame (Optional)
  • Unobstructed Side-to-Side/Front-to-Back Feed Through (Standard)
  • Bench-Top Use (Standard)
  • External Adjustable Air pressure Regulator and Gauge (Standard)
  • Prolane White Painted Finish (Standard)
  • Water Circulating Systems (Optional)
  • Pneumatic and Electric Powered
  • 115 Volt, 50/60 Hz AC Operation (Standard)
  • Special Voltage Available (Optional)

The iSeal Impulse Heat Sealer has been designed and engineered for heavy-duty use. Just what you would expect from a group of Vertrod
expatriates!
The unobstructed design provides access to the sealing jaws from either the front, side or back of the heat sealing machine.
The iSeal Impulse Heat Sealer is engineered to seal a variety of different compositions of thermoplastic films, textiles, laminations and thin foams.
The machine is designed to produce hermetic, airtight and watertight seals (dependent upon the sealing characteristics of the material).
Providing us samples of your specific materials for evaluation and testing is always suggested and sometimes required in order to insure the most suitable machine design and set-up. Representative sealed samples in your material will be returned for your own inspection and evaluation.


Please contact us for a quotation.


Spare Parts

All parts are manufactured and fashioned according to original factory specifications, by technicians who worked at the factory in Brooklyn, New York before it was decommissioned in 1999.
Spare Parts Kits and individual piece parts are readily available. Parts Kits are intended to furnish enough spare parts to support a standard machine for one year of routine operation.
Parts are shipped the same day they are ordered, in most cases.
Overnight delivery and Weekend shipments are available at extra charge.

* * *
Fax orders to Impulse Dynamics: (925) 940-9631

Email orders to: orderdesk@impulsedynamics.com

Major credit cards accepted

14EMP w/ Watlow
Temperature Controller

Home Page      About Us      Products      Spare Part Kits      Parts for Heater Bars
Part for Pressure Bars     Water Cooling     Service     Industrial Sealers     Maintenance Information
Vintage Vertrod      Electrical  & Pneumatic      Electronic & Pneumatic     Heater & Pressure Bars
Code Seal Kits & Supplies      Validtable Sealers      Drop Sealers
Cantilever Sealer      Sales Info      Favorite Links